SH60-1 SH60 KRJ1418 KRJ3850 AP2D25 Uchida Rexroth AP2D25 Hydraulic Main Pump Assembly Compatible with Sumitomo

1. Product Overview & Wholesale Price Range

The Sumitomo SH60-1 / SH60 Uchida Rexroth AP2D25 Hydraulic Main Pump Assembly (OEM Part # KRJ1418 / KRJ3850 / AP2D25 / AP2D25LV) is a dual axial piston variable displacement pump with gear pilot pump engineered for 6-ton mini excavators operating under continuous trenching, landscaping, and earthmoving works.

• Factory Wholesale Price: $1,200 – $2,400 USD (Direct manufacturer pricing — Save up to 50% vs regional dealer markups)
• MOQ & Bulk Discount: 1 Unit (Tiered wholesale discounts available for batch container orders)
• Lead Time: 1–3 business days (Large factory stock ready for immediate worldwide dispatch)
• Warranty: 12 Months full replacement warranty with 100% bench test video proof

2. Application Worksite Checklist (施工场景清单)

Precision-matched flow control designed to deliver smooth hydraulic displacement under continuous field operations:

• Urban Infrastructure & Utility Trenching: Fine hydraulic metering for smooth boom and arm excavation in narrow ditches with Sumitomo SH60-1 excavators.
• Road Repair & Foundation Earthmoving: Sustained working pressure under 280 Bar for rapid bucket loading cycles on Sumitomo SH60 excavators.
• Forestry Land Clearing & Agriculture Drainage: Thermal-resistant seal groups prevent oil bypass during long continuous operating hours in hot climates.
• Demolition & Concrete Breaking: Reinforced pump housing protects against severe pressure shockwaves from hydraulic hammer attachments.

3. Hydraulic Main Pump Troubleshooting & Diagnostic Guide (液压泵常见故障排查)

If your Sumitomo 6-ton excavator is exhibiting hydraulic system failure, consult the diagnostic guide below:

• Fault 1: Cold Machine Operates Normally, But Machine Slows Down & Drops Pressure After 1 Hour (冷车正常,热车掉压发慢)
  Root Cause: Thermal expansion wear gap between the piston shoes, cylinder block, and valve plate, causing internal high-pressure oil thermal bypass.
  Solution: Replace with a complete drop-in AP2D25 main pump assembly (OEM KRJ1418) or overhaul the internal rotary group kit.
• Fault 2: Engine Stalls or Overloads When Actuating Hydraulic Boom/Arm (憋车/发动机过载熄火)
  Root Cause: AP2D25 pump regulator power-control spool jammed or hydraulic pilot regulator valve miscalibrated.
  Solution: Recalibrate pump regulator pilot pressure or replace the complete regulator assembly to restore engine horsepower matching.
• Fault 3: Hydraulic Oil Leakage From Drive Shaft Seal Area (主驱动轴封高压串油漏油)
  Root Cause: Clogged casing drain line causing excessive internal housing backpressure, blowing out the front drive shaft skeleton seal.
  Solution: Flush housing drain lines, replace front drive shaft seal, and check gear pilot pump relief pressure.
• Fault 4: Abnormal Cavitation Noise or Severe Vibration From Main Pump (泵体异响抖动/气蚀)
  Root Cause: Air suction at inlet suction pipe, contaminated hydraulic tank filter, or worn drive shaft bearings.
  Solution: Replace suction line seals, flush hydraulic fluid tank, and replace drive shaft roller bearings.
• Fault 5: Black Metallic Filings Found Inside Hydraulic Tank Filter (油箱内有黑粉或金属屑)
  Root Cause: Severe friction galling on swashplate shoe bronze layer or cylinder block face failure.
  Solution: Flush entire hydraulic piping system, clean main control valve, and install a new AP2D25 main pump assembly.

4. Hot Machinery Replacement Parts Recommendation (5大品类热门推荐表)

Explore our factory-direct replacement hydraulic components compatible with major global excavator brands:

5. Frequently Asked Questions & Technical Support (QA 问答专区)

Q1: How do I verify if this Uchida Rexroth AP2D25 main pump fits my Sumitomo SH60-1 or SH60 excavator?
A: Check your original pump nameplate for OEM part numbers KRJ1418, KRJ3850, or AP2D25 stamp. You can also send us your machine serial number for instant fitment verification.

Q2: My Sumitomo SH60-1 excavator slows down after 1 hour of digging. Will replacing the AP2D25 pump solve this?
A: Yes, thermal slowdown is caused by internal pressure leakage inside the worn pump cylinder block. Installing our new AP2D25 pump restores full hydraulic speed and digging power.

Q3: Is this Sumitomo SH60-1 AP2D25 hydraulic main pump bench tested before shipment?
A: Yes, every single AP2D25 pump undergoes a 5-step factory bench test, verifying pressure up to 280 Bar and volumetric efficiency above 95%. A live test video is provided before shipping.